Description of Chevron Rubber Conveyor Belt
The Chevron conveyor belt is the most common patterned conveyor belt in our daily lives. With the development of the times and people’s increasing demand for production efficiency, chevron conveyor belts are widely used across industries such as mining, agriculture, and food processing. It can lift and transfer materials of various sizes and shapes.
Chevron conveyor belts from our company, an EP chevron conveyor belt supplier, can be used for lightly rolling materials such as gravel and coal with slopes up to about 30 °. And for viscous materials such as wet sand and dirt with slopes up to about 40°. Also, the chevron rubber conveyor belt, an efficient conveyor belt, is used to transport packaging, such as jute bags. It can prevent material slippage and improve delivery capacity. Before leaving our chevron rubber conveyor belt factory, our products are tested for tensile strength, abrasion resistance, and adhesion, ensuring they meet client requirements.
Get A QuoteProduct Specification
| Chevron Type | Pattern | C.H(mm) | C.W(mm) | C.P(mm) | Belt Width | |
|---|---|---|---|---|---|---|
| mm | inch | |||||
| C6 | C6-P230 | 6 | 230 | 75 | 300-400 | 12″-16″ |
| C6 | 6 | 300-1200 | 100 | 300-1200 | 12″ -48″ (1215) | |
| V6 | V6 | 6 | 600-1800 | 75 | 600-1800 | 24″ -72″ |
| C12 | C12-V800 | 12 | 800 | 150 | 800-1200 | 32″ -48″ (1206) |
| C15 | C15 -V330 | 15 | 330 | 250 | 400-600 | 16″ -24″ |
| C15-P385 | 15 | 385 | 250 | 500-800 | 20″ -32″ (800) | |
| C15-V450 | 15 | 450 | 300 | 600-600 | 24″ -32″ (800) | |
| C15-P500 | 15 | 500 | 340 | 550-750 | 22″ -30″ (750) | |
| C15-P600 | 15 | 600 | 250 | 750-1000 | 30″ -40″ | |
| C15-P750 | 15 | 750 | 250 | 900-1200 | 36″ -48″ (1215) | |
| C25 | C25-P450 | 25 | 450 | 335 | 600-750 | 24″ – 30″ (750) |
| C25-P550 | 25 | 550 | 250 | 600-800 | 24″ -32″ | |
| C25-P750 | 25 | 750 | 330 | 900-1200 | 36″ -48″ (1215) | |
| Y32 | Y32-P450 | 32 | 450 | 255 | 500-800 | 20″ -32″ (800) |
| Y32-P600 | 32 | 600 | 300 | 800-1000 | 32″ -36″ | |
| Y32-P800 | 32 | 800 | 333 | 1050-1200 | 36″ -48″ | |
Chevron Conveyor Belt Structure
-
Chevron Pattern Layer: The shape and height of the patterns can be customized based on the materials being transported.
-
Top Cover Rubber: Bonded directly to the carcass, providing cushioning and protection.
-
Carcass Layer: Available in EP (Polyester), NN (Nylon), or Steel Cord options.
-
Adhesion Layer: Situated between the cover rubber and the carcass to prevent delamination.
-
Bottom Cover Rubber: Features high wear resistance and smoothness to ensure the smooth operation of the conveyor belt.
Types of Chevron Conveyor Belt
Y-type Chevron Conveyor Belt
Similar to the enclosed V-type, but with a more compact design.
Open V-type Chevron Conveyor Belt
The V-shaped pattern opens at both ends, with gaps between the ribs, ensuring good drainage.
Closed V-type Chevron Conveyor Belt
The V-shaped pattern is closed at both ends, forming a closed herringbone structure that offers excellent material-retention properties.
Get A Quote
U-type Chevron Conveyor Belt
The conveyor belt features a U-shaped pattern structure, offering high gripping force and reduced spillage.
Multi-V Chevron Conveyor Belt
Multiple V-shaped elements are arranged side-by-side, resembling a herringbone structure; this configuration offers high capacity and excellent stability.
Get A Quote
Special-shaped Patterned Chevron Conveyor Belt
Customized according to client requirements, suitable for the conveyance of specific materials.
Get A QuoteChevron Conveyor Belt Specifications
| Category | Details |
| Fabric Layers | Plies: Common: 2, 3, 4, 5, 6 plies (Customizable) |
| Carcass Material: EP (Polyester/Nylon), NN (Nylon), CC (Cotton), CP (Polyester/Cotton Blend) | |
| Cover Grade | Abrasion Resistant, Heat Resistant (HR), Oil Resistant (OR), Acid/Alkali Resistant (SAR), Cold Resistant, Flame Retardant (FR) |
| Edge Type | Molded Edge, Cut Edge |
| Splicing Method | Hot Vulcanized Splice, Cold Bonded Splice, Mechanical Fastener |
Pattern (Chevron) Specifications
| Pattern Type | Pattern Height | Inclination Angle | Pattern Width | Belt Width | Pattern Pitch |
| Low Pattern | 5 – 6 mm | 16° ~ 20° | 230 – 1800 mm | 300 – 1800 mm | 125 – 250 mm |
| Medium Pattern | 12 – 17 mm | 20° ~ 30° | 250 – 950 mm | 300 – 1200 mm | 200 – 330 mm |
| High Pattern | 20 – 25 mm | 30° ~ 35° | 450 – 1335 mm | 500 – 1600 mm | 250 – 500 mm |
| Super High | 30 – 32 mm | 35° ~ 45° | 450 – 1220 mm | 500 – 1400 mm | — |
| Extra High | 40 – 50 mm | 35° – 45° | — | — | — |
Custom Chevron Rubber Conveyor Belt
Pattern Customization
| Shape Type | Cleat Height Grade | Range | Max Inclination Angle | Applicable Scenarios |
| Open V | Low Profile | 5-8mm | 20-25° | Small angles, fine-grained materials |
| Closed V | Standard | 10-16mm | 25-30° | Conventional inclined transport |
| U-Shape | High Profile | 16-25mm | 30-35° | High-angle transport |
| Special Pattern | Extra High Profile | 25-32mm | 35-40° | Extreme inclination angles |
Note:
-
Cleat Height: In the industry, the “ribs” or patterns on a chevron belt are formally referred to as cleats.
-
Open V / Closed V: These are standard industry terms for these specific geometric patterns.
-
Inclination Angle: Refers to the steepness of the conveyor’s slope.
Rubber Compound Options
| Compound Type | Operating Conditions / Applications |
| Standard Abrasion Resistant | General material handling |
| High Abrasion Resistant | Highly abrasive materials (Ores, Coke) |
| Heat Resistant | High-temperature materials (Cement, Slag, Sinter) |
| Cold Resistant | Low-temperature environments (Cold storage, Northern winters) |
| Oil Resistant | Oily materials (Oilseeds, Chemicals) |
| Acid & Alkali Resistant | Corrosive materials (Fertilizers, Chemical raw materials) |
| Flame Retardant / Anti-static | Coal mines, Flammable environments |
| Burning Resistant | Red-hot materials (Extremely high temperatures) |
Carcass Customization
Carcass Types: EP (Polyester Fabric), NN (Nylon Fabric), Steel Cord
| Total Tensile Strength (N/mm) | Carcass Material | Fabric Plies | Applicable Belt Width (mm) |
| 200-800 | EP100 | 2-10 | 350-2000 |
| 315-1250 | EP150 | 2-10 | 350-2000 |
| 400-1500 | EP200 | 2-10 | 350-2000 |
| 500-2000 | EP250 | 2-10 | 350-2000 |
| 500-2000 | EP300 | 2-6 | 350-2000 |
| 500-2000 | EP400 | 2-6 | 350-2000 |
| 630-2500 | EP500 | 2-6 | 350-2000 |
Edge & Processing Customization
| Processing Type | Description |
| Cut Edge | Directly cut by mechanical blade |
| Molded Edge | Vulcanized molded edges |
| Wrapped Edge | Edges covered with rubber and vulcanized |
| Perforation | Precision hole punching based on drawings |
| Tracking Guide | V-guide profile added to the bottom surface |
Splicing Options
| Splicing Type | Advantages |
| Hot Vulcanized Splice | Widely used; offers high strength, superior wear resistance, and long service life. |
| Cold Bonded Splice | Simple operation, lower cost, and excellent environmental adaptability. |
| Mechanical Fastener | Ideal for emergency repairs; easy installation and re-detachable. |
How to Custom Chevron Rubber Conveyor Belt
01 Requirements Communication
-
The customer provides parameters.
-
Material/Inclination Angle/Temperature
-
Drawings are generated for customer confirmation.
02 Mold Development
-
Pattern Shape (Open/Closed/U-shaped)
-
Pattern Height (5-32mm)
-
Pattern Spacing (125-500mm)
-
Base Strip Width
03 Rubber Formulation
-
Primarily imported natural rubber.
-
Functional additives: heat resistance, cold resistance, flame retardancy, oil resistance
04 Core Selection
-
CC Cotton Canvas (56-110N/mm)
-
NN Nylon Canvas (100-400N/mm)
-
EP Polyester Canvas (100-600N/mm)
-
ST Steel Wire Rope Core (600-5600N/mm)
05 Vulcanization Molding
-
Integrated vulcanization of the pattern and the belt
-
Top cover rubber
-
Bottom cover rubber
-
Interlayer bonding
06 Quality Inspection
-
Tensile Test
-
Pattern Stability Inspection
-
Anti-deviation Test
-
Adhesive Strength Test
07 Processing Shipping
-
Cutting to the specified length
-
Joint processing
-
Edge sealing/binding
-
Packaging and shipping
Applications and Features of Chevron Conveyor Belt
Chevron conveyor belts are widely used in mining, cement production, chemical production, paper-making, and glass fiber production.
As one of the Chevron conveyor belt manufacturers, we can produce high-strength, thin, and light belts. Our products feature a soft belt body, good throughability, and excellent elasticity. It also has excellent impact, wear, and corrosion resistance, with a long service life, stable operation, and durability.
